Please Note: You are viewing the unstyled version of POLARIS Laboratories. Either your browser does not support CSS (Cascading Style Sheets) or it is disabled. As a result, much of this website will not look the way it was intended, although all of its contents will be accessible to you. For more information, visit our Browser Support page.

Skip to Primary Site Navigation, Secondary Site Navigation, Content, Company Address

Home > Publications Directory > Technical Bulletins > Reduced Lubricity Increases Fuel Pump, Injector Wear

Reduced Lubricity Increases Fuel Pump, Injector Wear

Fuel can

Diesel fuel now undergoes additional steps in the refining process to meet the EPA's new ultra low sulfur requirement of <15 ppm. It's these additional steps that reduce a fuel's lubricity. Because fuel pumps and injectors rely on diesel fuel for lubrication, less lubricity means increased pump and injector wear and possibly failure.

The standard test method for evaluating the lubricity of diesel fuels is ASTM D6079. A 2mL fuel sample is placed in the test reservoir of a high frequency reciprocating rig (HFRR) and adjusted to either of the standard temperatures of 25 or 60°C. The preferred test temperature is 60°C, except where there may be concerns about loss of fuel because of its volatility or degradation at this temperature.

When the fuel's temperature has stabilized, a vibrator arm holding a non-rotating steel ball and loaded with a 200g mass is lowered until it contacts a test disk completely submerged in the fuel. The ball is caused to rub against the disk with a 1mm stroke at a frequency of 50 Hz for 75 min. The ball is then removed from the vibrator arm and cleaned. The dimensions of the major and minor axes of the wear scar are then measured under 100X magnification and recorded. If the wear scar is >520µ (microns), the fuel doesn't have sufficient lubricity to properly lubricate the fuel pump and injectors.

Fuels that fail lubricity testing may be treated with lubricity agents. Always consult your fuel supplier for details before doing so.

Print this Technical Bulletin (PDF - 94K)


Top

News

New Fuel Test Packages Will Reduce Fleet Expenses and Downtime

POLARIS has developed an extensive range of fuel troubleshooting test packages that can confirm the quality of bulk deliveries and resolve what might be causing costly repairs and fleet downtime. Fleet managers spend more money on fuel than any other operating expense, so this is an area of great importance.

Read More

Sign Up for eNewsletters


POLARIS Named Fluid Analysis Provider for Industry's Largest International Oil Distributor Group

The Association of Independent Oil Distributors (AIOD) announced this month its launch of the Purus Assurance System, a fluid analysis program administered by POLARIS Laboratories™ to support AIOD's newest brand, Purus.

Read More


Training

  • Salt Lake City
    Cooling Systems Maintenance
    September 20, 2010

  • Salt Lake City
    Practicing Oil Analysis
    September 21-22, 2010

  • Edmonton, AB
    Cooling Systems Maintenance
    October 26, 2010

View complete schedule and registration information


Tradeshows & Conferences

  • Oil Sands Show
    Ft. McMurry, Alberta
    September 15-17, 2010

  • Lloydminster Heavy Oil Show
    Lloydminster, SK
    September 15-16, 2010

View all tradeshows