POLARIS Laboratories, LLC - Sampling Equipment

Non-Pressurized Lubrication System Testing Equipment, Central Pressurized Lubrication Systems, Oil Analysis, Coolant Analysis, Fuel Analysis

KP SERIES
The KP series pushbutton sampling valve taps hot active fluid in pressurized systems in seconds. Tested for 1 million cycles, this valve installs in minutes while the unique rotating spout allows one hand sampling. The compact design comes with a choice of threads and seals. No probes required.

KP Series Pushbutton Sampling Valve Spec Sheet & Ordering Information - (375K, PDF)

KST SERIES
The KST Series probe sampling valve is easy to use. The probe taps hot active fluid in pressurized systems in seconds. Tested for 1 million cycles, this valve includes a rugged metal cap with backup seal. The KST Series comes with a choice of threads and seals.

KST Series Probe Sampling Valve Spec Sheet & Ordering Information - (387K, PDF)

VACUUM PUMP
The Vacuum Pump is used to extract samples from a dipstick or non-pressurized system. The pump is attached to the sample jar, a tube is inserted into the pump and then into the dipstick or oil fill about half-way. By activating the pump handle, the sample jar should then be fill about 3/4 full. Tubing is available in 100 ft. and 1,000 ft. rolls. Sample jars and tubing sold separately.

BT SERIES
The BT Series Tube Extenders offers precise sampling of low viscosity oil from low or unpressurized systems. Swivel and stainless steel options are available.

BT Series Tube Extenders & Ordering Information - (493K, PDF)

How to Take an Oil Sample

Sampling Intervals & Locations Chart