Please Note: You are viewing the unstyled version of POLARIS Laboratories. Either your browser does not support CSS (Cascading Style Sheets) or it is disabled. As a result, much of this website will not look the way it was intended, although all of its contents will be accessible to you. For more information, visit our Browser Support page.

Skip to Primary Site Navigation, Secondary Site Navigation, Content, Company Address

Oil and Water DO Mix

In systems prone to water contamination, it is imperative that the contaminated oil be able to shed water, or demulsify, in order to maintain lubricity, viscosity and prevent the formation of acids.

Contrary to the cliché that “Oil and water don't mix,” most oils, at some level of water contamination, will mix, or emulsify. The Water Separability Characteristics Test, ASTM D-1401, is a guide for determining the demulsibility of both new and used oils. 40mL of the test oil and 40mL of distilled water are placed in a heated bath and agitated. The test concludes when the water and oil separate into their respective phases.

If the emulsion is still present after 30 minutes, the test is concluded and the volumes of oil, water, and emulsion are reported. If, after 30 minutes, more than 3mL of emulsion is present, the oil is considered to have failed the test. It would be recommended that the oil be changed and the root cause of the oil's failure to pass determined as an emulsified oil will lead to lubrication starvation, sludge formation, corrosive wear and, eventually, failure.

Print this Technical Bulletin (PDF - 87K)


Top

News

New Fuel Test Packages Will Reduce Fleet Expenses and Downtime

POLARIS has developed an extensive range of fuel troubleshooting test packages that can confirm the quality of bulk deliveries and resolve what might be causing costly repairs and fleet downtime. Fleet managers spend more money on fuel than any other operating expense, so this is an area of great importance.

Read More

Sign Up for eNewsletters


POLARIS Named Fluid Analysis Provider for Industry's Largest International Oil Distributor Group

The Association of Independent Oil Distributors (AIOD) announced this month its launch of the Purus Assurance System, a fluid analysis program administered by POLARIS Laboratories™ to support AIOD's newest brand, Purus.

Read More


Training

  • Salt Lake City
    Cooling Systems Maintenance
    September 20, 2010

  • Salt Lake City
    Practicing Oil Analysis
    September 21-22, 2010

  • Edmonton, AB
    Cooling Systems Maintenance
    October 26, 2010

View complete schedule and registration information


Tradeshows & Conferences

  • Oil Sands Show
    Ft. McMurry, Alberta
    September 15-17, 2010

  • Lloydminster Heavy Oil Show
    Lloydminster, SK
    September 15-16, 2010

View all tradeshows